Σάββατο 9 Σεπτεμβρίου 2017

MARCELL 3+


MARCELL 3+
3-Band Marine Antenna System Covering FM-Radio, Maritime VHF and 900 MHz Cellular (EGSM/NMT-900)
Complete package for FM-Radio, maritime VHF and 900 MHz cellular
all you need extra is a downlead cable.
The antenna is mounted using the 1” revolving nut system and easily replaces the existing antenna – the downlead cable may be reused.
DESCRIPTION
ORDERING DESIGNATIONS
SPECIFICATIONS
ACCESSORIES
SPECIFICATIONS
ELETRICAL
MODEL MARCELL 3+
ANTENNA TYPE Triple-band marine antenna
ANTENNA FREQUENCY FM Radio: 87.5 - 108 MHz
Maritime VHF: 155 – 162 MHz
EGSM: 890 – 960 MHz
FILTER
FREQUENCY VHF Radio: 144 - 175 MHz (COM1)
Mobile telephone: 880 – 2200 MHz (COM2)
Car radio: 0 – 108 MHz (RADIO)
IMPEDANCE Nom. 50 Ω
RADIATION Omnidirectional
POLARISATION Vertical
ANTENNA GAIN 2 dBi 0 dBd on both VHF and EGSM
ANTENNA SWR TX: ≤ 1.5
RX: ≤ 2.5
FILTER INSERTION LOSS 0 – 108 MHz: ≤ 1.0 dB
144 – 175 MHz: ≤ 0.8 dB
880 MHz - 2.2 GHz: ≤ 0.7 dB
FILTER ISOLATION COM1 to COM2: ≥ 40 dB
COM1 to car radio: ≥ 35 dB
COM2 to car radio: ≥ 45 dB
MAX. POWER 35 W on each filter port
10 W on 880 - 2200 MHz filter port
(100 W for the antenna)
ANTISTATIC PROTECTION All metal parts of the antenna are DC-grounded
(shows a DC-short at the connector)
MECHANICAL
TEMP. RANGE -30°C → +70°C
CONNECTOR Antenna: N-female
Filter: COM1, COM2,
Antenna: FME
Car radio: CRC-connector (M10 x 0.75)
Jumper cable: FME-female and N-female
ADAPTOR CABLE 40 cm RG 58
DOWNLEAD CABLE Not supplied.
Min. RG 213 recommended.
WIND SURFACE Approx. 0.013 m²
WIND LOAD Approx. 15 N @ 150 km/h
COLOUR Marine white
ANTENNA MATERIALS Shroud: Polyurethane coated glass fibre
Mounting bracket: Chromed brass
ANTENNA HEIGHT Approx. 1.1 m
DIA. IN TOP END 8 mm
DIA. IN BOTTOM END 16 mm
FILTER DIMENSIONS (W x H x D) 50 x 21 x 50 mm
ANTENNA WEIGHT Approx. 400 g
MOUNTING On 1” RG (G1”-11) threaded pipe or on optional mounting brackets (see below).

Δεν υπάρχουν σχόλια: